In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the home, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Be sure that the edges are cut so that the edges aren’t sharp, as https://dogsrecommend.com/dog-mask this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask on your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are flat and make certain it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll have to do some sanding to make certain it’s secure on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.